Check the advice before changing how you run your fans, heating system, computer and dishwasher.
There are a lot of energy-saving tips out there that claim to help you reduce your energy costs and increase your financial savings. Unfortunately, they’re not all true. Here are five of the most common energy-saving myths.
Small changes in how you use household equipment can reduce wasted energy. Original illustration from the RESNET article.
1. Keeping a Ceiling Fan Running Cools the Room
In summer, a ceiling fan cools people through air movement. Running it in an empty room wastes electricity. The way a fan works is by circulating the air in the room, which when it makes contact with skin, makes us feel cooler. A fan does not lower the room’s air temperature. In winter, a low-speed reverse setting can help redistribute warm air near the ceiling. A better option is to turn the fan off when you leave the room and save on the energy cost. See DOE’s Energy Saver guide.
2. Setting the Thermostat Higher Heats Your Home Faster
You might think that by walking into a cold room and cranking the thermostat up to 88˚F is going to make the room heat up faster. For a single-stage furnace, raising the setting does not increase its heating output. The thermostat calls for heat until the room reaches the set temperature. Multistage and variable-speed systems can respond differently, and heat pump controls may call for auxiliary heat. Follow the equipment’s recommended thermostat settings. In fact, you may waste energy by forgetting to reset the temperature once the home has been heated. Instead, simply set the thermostat to your ideal temperature. The same principle applies to cooling a house. See DOE’s heat pump thermostat guidance.
3. Turning Your Computer on and off Wastes Energy
This is a very common energy-saving myth. Turning a computer off during long idle periods reduces the energy it uses. You can also take advantage of built-in energy-saving features such as the “sleep” function that essentially puts your computer to sleep when not in use and wakes it when you go back to it. Again, this saves what would otherwise be a lot of wasted energy. See ENERGY STAR computer guidance.
4. Closing Vents and Registers in Unused Rooms Saves Energy
Closing registers in a central forced-air system can restrict airflow and increase duct pressure. It can strain the system and increase energy use. A designed zoning system uses controls and dampers selected for the equipment; it is a different arrangement from closing registers by hand. There’s no point in shutting off vents and registers in an effort to save energy – you’re probably doing the opposite instead. Use thermostat settings suited to your equipment. Heat pumps need compatible controls for efficient setbacks. See DOE’s home energy guidance.
5. Save Energy by Washing Dishes by Hand Instead of the Dishwasher
An efficient dishwasher can use less hot water and energy than hand washing, particularly when dishes would otherwise be washed under running water. Results depend on the appliance, cycle, load and hand-washing method. Many modern dishwashers have energy efficiency settings that use less water and energy to keep costs down. Run full loads, scrape instead of pre-rinsing, and use air drying when available. See ENERGY STAR dishwasher guidance.
This content was originally published by the Residential Energy Services Network (RESNET) here. This content has been republished with the permission of RESNET. RESNET is the independent, national nonprofit organization that homeowners trust to improve home energy efficiency and realize substantial savings on their utility bills. RESNET’s industry-leading standards are recognized by the U.S. Department of Energy and the U.S. Environmental Protection Agency, among others.
Ryan Meres is RESNET Program Director. Ryan has 10 years of experience in energy efficiency, energy policy and building energy codes and has published more than two dozen case studies, reports and resources on those topics. He spent nearly six years at the Institute for Market Transformation (IMT) where he led energy code development, adoption and compliance efforts at the city, state and national levels. Prior to joining IMT, Mr. Meres was an ICC Fellow at the U.S. Department of Energy, Building Energy Codes Program. He also worked at the Georgia Department of Community Affairs (DCA) as a Building Codes Consultant where he led the adoption and implementation of statewide energy and green building codes. Ryan successfully completed a HERS class in 2007 and served as an EarthCraft House Technical Advisor at the Southface Energy Institute, conducting insulation and air sealing inspections, and building envelope and duct leakage testing for builders. He is a LEED Accredited Professional, an ICC Certified Residential Energy Inspector/Plans Examiner and holds a Bachelor’s Degree in Architecture from the Savannah College of Art and Design.
Five Common Energy-Saving Myths
Check the advice before changing how you run your fans, heating system, computer and dishwasher.
There are a lot of energy-saving tips out there that claim to help you reduce your energy costs and increase your financial savings. Unfortunately, they’re not all true. Here are five of the most common energy-saving myths.
Small changes in how you use household equipment can reduce wasted energy. Original illustration from the RESNET article.
1. Keeping a Ceiling Fan Running Cools the Room
In summer, a ceiling fan cools people through air movement. Running it in an empty room wastes electricity. The way a fan works is by circulating the air in the room, which when it makes contact with skin, makes us feel cooler. A fan does not lower the room’s air temperature. In winter, a low-speed reverse setting can help redistribute warm air near the ceiling. A better option is to turn the fan off when you leave the room and save on the energy cost. See DOE’s Energy Saver guide.
2. Setting the Thermostat Higher Heats Your Home Faster
You might think that by walking into a cold room and cranking the thermostat up to 88˚F is going to make the room heat up faster. For a single-stage furnace, raising the setting does not increase its heating output. The thermostat calls for heat until the room reaches the set temperature. Multistage and variable-speed systems can respond differently, and heat pump controls may call for auxiliary heat. Follow the equipment’s recommended thermostat settings. In fact, you may waste energy by forgetting to reset the temperature once the home has been heated. Instead, simply set the thermostat to your ideal temperature. The same principle applies to cooling a house. See DOE’s heat pump thermostat guidance.
3. Turning Your Computer on and off Wastes Energy
This is a very common energy-saving myth. Turning a computer off during long idle periods reduces the energy it uses. You can also take advantage of built-in energy-saving features such as the “sleep” function that essentially puts your computer to sleep when not in use and wakes it when you go back to it. Again, this saves what would otherwise be a lot of wasted energy. See ENERGY STAR computer guidance.
4. Closing Vents and Registers in Unused Rooms Saves Energy
Closing registers in a central forced-air system can restrict airflow and increase duct pressure. It can strain the system and increase energy use. A designed zoning system uses controls and dampers selected for the equipment; it is a different arrangement from closing registers by hand. There’s no point in shutting off vents and registers in an effort to save energy – you’re probably doing the opposite instead. Use thermostat settings suited to your equipment. Heat pumps need compatible controls for efficient setbacks. See DOE’s home energy guidance.
5. Save Energy by Washing Dishes by Hand Instead of the Dishwasher
An efficient dishwasher can use less hot water and energy than hand washing, particularly when dishes would otherwise be washed under running water. Results depend on the appliance, cycle, load and hand-washing method. Many modern dishwashers have energy efficiency settings that use less water and energy to keep costs down. Run full loads, scrape instead of pre-rinsing, and use air drying when available. See ENERGY STAR dishwasher guidance.
This content was originally published by the Residential Energy Services Network (RESNET) here. This content has been republished with the permission of RESNET. RESNET is the independent, national nonprofit organization that homeowners trust to improve home energy efficiency and realize substantial savings on their utility bills. RESNET’s industry-leading standards are recognized by the U.S. Department of Energy and the U.S. Environmental Protection Agency, among others.
Updated content · November 18, 2026
By Ryan Meres, RESNET Program Director
Ryan Meres is RESNET Program Director. Ryan has 10 years of experience in energy efficiency, energy policy and building energy codes and has published more than two dozen case studies, reports and resources on those topics. He spent nearly six years at the Institute for Market Transformation (IMT) where he led energy code development, adoption and compliance efforts at the city, state and national levels. Prior to joining IMT, Mr. Meres was an ICC Fellow at the U.S. Department of Energy, Building Energy Codes Program. He also worked at the Georgia Department of Community Affairs (DCA) as a Building Codes Consultant where he led the adoption and implementation of statewide energy and green building codes. Ryan successfully completed a HERS class in 2007 and served as an EarthCraft House Technical Advisor at the Southface Energy Institute, conducting insulation and air sealing inspections, and building envelope and duct leakage testing for builders. He is a LEED Accredited Professional, an ICC Certified Residential Energy Inspector/Plans Examiner and holds a Bachelor’s Degree in Architecture from the Savannah College of Art and Design.